magzhen CLEAN/C Factory Rolex Daytona Real vs. Fake Review
CLEAN/C Factory Rolex Daytona 116519 Cement Gray Comparison of Real and Fake
Purchased two original open molds, one of which has come apart. There are separate literal comparisons
The factory was commissioned to individually develop a tape product of unparalleled quality for clean.
The clasp is still ar OEM tape clasp, quality assurance.
The lettering is vacuum pvd plating, the thickness is only 4um, rejecting the 200um oil spraying
The craftsmanship is inconsistent and obscures the bottom sunburst, making it look extremely cheap.
The bottom of the case is engraved with the head of a St. Bernard dog as well as other precious metals, and the details are also done
Took it to the extreme. The /dog’s head section needs to be strengthened and there is still one hair that can’t be attacked at the moment.
The case/mounting tape position, this time with coded engraving, is closer to the original
Precious metal engraving is particularly easy to ignore a detail, the bottom of the case 4 precious metal engraving, magnified tens of times after the comparison. The lower right corner of the St. Bernard dog head is a personal belief that there is still a significant difference, the follow-up will strive to improve, the future of the c factory out of each style, will be so for comparison, I hope to be able to the table friends in charge of the
Attitude to do a good job with each product. Not afraid to question, only in the questioning can make the product more perfect,.
Drawing on the suggestions and comments of our guests. The real part shows yellowish tone, because the real one is 750 white gold material. So the real thing does not have steel material plus
Work out so silver white. This belongs to the problem of the material, including the weight will also have a difference, the normal naked eye observation
It’s not easy to tell the difference, so many people are reluctant to buy a white gold watch just because it’s too much like a steel watch.
Case side curvature, handle, chronograph button, case bottom flat angle, as well as the assembly of the case and head grain, in full accordance with the original one to one copy, can not say 100% the same, but basically 90% or more, to be able to go to the camera like this to compare, is enough to show that the c factory for the Ditonne accessories on the heart.
As well as daring to face their shortcomings. As far as the curvature of such an inconspicuous location as the picture in the lower left corner is concerned, it’s all done
To try to be consistent. c factory product variety is not much, but models are purchased original for disassembly, fried number of
Repeatedly checking for production. I can’t speak of craftsmanship, I can only speak of the fact that when it’s done, it’s done to the best of my ability. That’s why c-factory stuff is always at its slowest.
Starting from the tape Ditonne, try cnc engraving on the side of the case, the original is also engraved process, this part we tried many times, finally broke through this problem, and will be applied to other models do not underestimate the engraving part, the cost is one aspect, after engraving, the yield rate of the case will also be reduced. But in terms of aesthetics, it’s much closer to the original. No effort has been spared in this regard. We hope that we can continue to make progress in all kinds of details and keep up with the times.
handle bar
Handle head as well as chronograph button, the crown mark close, chronograph button exposed to the two rings of threads also do the same ceramic ring part of the
Ceramic ring extracted several angles for comparison, platinum color fill, as well as the size of the font, and even the ceramic ring font as well as the edge of the font of the rounded corners are done perfectly. Head grain part
The curvature of the head grain and the articulation after installation is almost seamless. The head grain is made separately, and the cost of this part is more than that of a normal steel case.
There are many more styles. ps: This is part of the reason why the tape model is more expensive than the regular steel model. Inside Shadow Part
The shape of the characters in the inner shadow part is already relatively close, each case, the inner shadow will have a slight difference, we are also based on the different original version to make a copy of the number, compared to the
Through the above photos, it is not difficult to see c factory literally relative color darker, and the sun pattern is not so delicate, before the sun pattern of the green ghost, as well as the log a variety of colors, have tried to succeed, only this grey became this half a year more than the development of the boss of the problem, a variety of methods of attempts, the green Jindi color and the sun pattern has been attacked, the only grey is really no way to not complain of bitterness, is relative to the development of products previously can only be considered passable above, but also compared to a variety of versions on the market can only say that slightly better than the current version of the market will be doubled efforts to improve. Before the development of the product, this can only be considered pass above, but also compared to the various versions on the market, can only be said to be slightly better than the current version of the market, the follow-up will redouble efforts to improve. The face of the problem will still solve the problem, of course, since we dare to shoot so contrast by making the worst psychological preparation. I hope that watch friends can understand. But we refuse to adjust the color or fake, even the comparison chart are fake, simply funny. We also promise here, for any update of the cement gray dial, will be free to watch friends to replace the latest version of the dial. After all, it is one percent of the price, thanks for understanding.
